Coolant in the oil on a 5.9 what can be the problem?not a head,head gasket,or the oil cooler?

If the head gasket and radiator are OK, then it is either a crack or the intake manifold gasket leaking.Coolant in the oil on a 5.9 what can be the problem?not a head,head gasket,or the oil cooler?
Yes, it could be a crack in the block or blown head gasket.Coolant in the oil on a 5.9 what can be the problem?not a head,head gasket,or the oil cooler?
WHY DO YOU SAY IT'S NOT ANY OF THOSE THINGS? WHAT HAVE YOU DONE TO CHECK THEM?





ADVISE
My guess is intake gasket.
It's either the head or head gasket, I don't think the oil cooler is a water to air type. As a matter of fact, I don't think they have an oil cooler on the 360.
to me it sounds like the head gasket or toy might have a crack in the head or block





good luck


hope this helps
i own a shop,and if your sure its not a head gasket or anything then you have a crack in the block or the head ,it has to be one of the two on it,i changed one a while back that cracked both heads,and the owner didn't even wont the old engine,he wanted it all changed out,but its pretty obvious ,if your sure its not none of those things ,it only leaves a few others ,possibly a intake gasket on it,that would be the easiest to repair,good luck,i hope this help,s.
These are the only 2 points that both the coolant and oil share